Electric power industry consulting
Usually, AC cable lines are up to 10 km long. However, in some cases the length can reach 50 km or even 100 km. In such cases, the cable line has a significant capacitance, which must be charged and discharged following the sine wave of the alternating voltage of the AC network. This alternating current
Usually a cable line has one cable (one core) for each of the three phases A,B,C. However, there are cases where the number of cables per phase increases up to 6 (see photo) or even more. This may be necessary, for example, so that the line can pass the entire operating current of the supply
Single-core cables with XLPE insulation are massively used in 110-500 kV networks. Solid (two-sided) grounding of the screens of such cables leads to negative consequences, and therefore, as a rule, for screens should be used:✅Single-point grounding (see diagram)✅Cross-bonding. In both schemes, voltages may occur on screens relative to the ground caused by interference from the